Gettin' Crafty (Part 2) - Curtains & DIY Headboard

I mentioned in my last Gettin' Crafty (Part 1) post that I was working on a few different projects for our home. I've been inspired by hours spent watching HGTV recently - which is dangerously addicting, let me tell you!

CURTAINS

After waaaay tooooo many hours, the basement curtains are finally finished:

BEFORE:

AFTER:

HEADBOARD

The next project was a headboard for our bed. Disclaimer - this next section is verrry long. If you want to just see the before and after pictures, scroll to the end. If you are at all interested in knowing how I made the headboard or are thinking of making your own, read on!

I had been looking at headboards at various stores for quite some time and decided I really liked tall upholstered headboards like this one from Restoration Hardware:

Source

Well, these babies can cost upwards of $2,000 on the high side and $650 on the low side. With a baby ruling the house and now living on one income, we didn't have that kind of cash just sitting around waiting to be spent on a headboard. SO, I decided to tackle it myself with a very helpful blog post by a woman named Sara from St. Louis. Her blog is called Running from the Law, and her DIY Headboard post can be found HERE. I've never actually met her (or talked to her - heck, she doesn't even know I exist or that I've spent hours perusing her blog), but I owe her BIG TIME... this would have taken so.much.longer without her excellent step-by-step guide.

BEFORE:

PROCESS: sorry, I forgot to take photos at each step :(

I bought an 1/4"x8'x4' sheet of MDF (medium Density Fiberboard) at Home Depot and had them cut off the sides so that it would be 82" wide. Our bed is 76" wide and I wanted 3" on each side. I then had them cut the remaining portion in half and in half again, meaning I now had 4 small pieces of MDF that were 2 feet tall each.  I used two of them as the legs and the other two portions to  screw the legs onto the actual headboard (see photo below). After using gardening shears as a compus to create a curve at each corner, I used my AWESOME new Rotozip (just a fancy jigsaw -which was 40% off... cha ching) to cut the corners. A helpful hint is to measure just one corner, getting the exact curve you want. After you saw that corner off, take it to the other side and trace it to ensure both corners are the same:

I then took 1" foam that I bought from Joann's Fabric and cut it to the same shape as the headboard (using a long steak knife, actually). Make sure you cut foam for the legs too.

I attached the foam to the MDF with a very strong adhesive from Joann's. I recommend you use this adhesive by Loctite and not a cheaper one. I ran out of the good stuff with just a bit left to do and found a cheap bottle in our garage left by the previous owners of our home - it didn't even compare and did not work too well. 

Cutting the foam to size

This is where I really dropped the ball with the photos, so I'll do my best to explain. I bought a very inexpensive cotton batting from Joann's and laid this over the headboard, cutting it to the correct size. I clamped the batting in place and then turned the headboard over (with the help of my very strong & supportive hubby) to staple it to the MDF. I highly recommend you buy an electric stapler for this project - SO worth it with the ridiculous volume of staples used. Here is the inexpensive staple gun I bought from Home Depot (just $27).

Next I turned the headboard back over and laid out a sheet of grey fabric I had bought at Joann's (because I was ultimately using a somewhat-see-through white linen for the outside of the headboard, I needed another layer of fabric underneath).  I followed the same process as the batting - clamped the fabric in place, turned the headboard over and stapled around the edge (every 3 inches or so).

After that, I turned the headboard over again and laid out the white linen fabric from Joann's. A couple notes here:

• Do NOT wash and dry the fabric if you are making a tall headboard and using linen fabric. Big rookie mistake. HUGE. I had measured the headboard and concluded the main part was 47" tall. I knew the fabric I bought was 54" wide - should have been perfect. Oh no no no... I had the brilliant idea to wash and dry the fabric first... did you know that linen can shrink by up to 15%? I.definitely.did.not. So my 54" fabric was now 46" wide... how was that going to fit a 47" headboard you ask... it wasn't! Unaware at the time that I had shrunken the fabric, I took it back to Joann's and demanded they take it back and explain how they could have sold me the wrong size fabric. How embarrassed I was when the sales woman pointed out that it was actually my fault for drying it, and that they couldn't take it back. Oops! Thankfully they still had the fabric and I was able to buy another piece.
• Also, make sure you iron the fabric before you try to attach it to the headboard (thankfully I did this before embarrassing myself a second time).

After clamping the linen to the headboard, I again turned the headboard over and stapled the crap out of the linen. Here's a picture of me stapling away in my "workshop" (a.k.a. very cold and messy garage). I do not recommend stapling up like I am doing here - it it much safer and easier to turn the headboard over and staple downwards.

The next step was to make buttons. I did this using a kit from Joann's and scraps of the linen. I made 8 buttons in total and then measured on the headboard where they would be placed (I measured 12" from the top for the top row and 12" down again for the bottom row. Each button was then 12" away from the button to the left and right).  Here is the measuring in action:

I did the same measurements on both the top and the bottom. On the bottom, I used a drill (and bit) to drill through the MDF. I then used a large needle and thick string to thread the needle up through the hole & through the foam and fabric (making sure the needle lined up with the marking on the top). After threading the needle through the button and back through the hole in the foam and MDF, I used staples to attach the string to the board:

Here's a close up of how I used the staples to attach the string:

 With all the buttons in place, we're almost done!

The last step was to attach the Nailhead Trim I had ordered from Sears.  Instead of actual trim where you hammer in each individual nail, this is actually a 5 yard "string" of silver beads (that resemble the tops of nails). Each 5th bead has a hole where you stick in and hammer one of the nails that comes with the package. It is much more cost effective and timely than trying to hammer in hundreds of nails. I used a blue fabric pen (washes off with water) to measure 2" from the edge all around the headboard and then placed the trim along the line. One hard thing is that the foam under the fabric is 1" thick but the trim nails are only about 1/2" long so I also used a very strong glue under the trim to make it stay in place.

Here is the FINAL PRODUCT! While not as luxurious as the $1500 Restoration Hardware headboard after which I modeled my DIY version, it's definitely worth the $150 I spent. Plus, with all of it's sweat equity, it means so much more to me now...

Here's the before photo again for quick comparison:

You may have noticed that the lamps are different too... oh what a little silver spray paint and new lampshades will do!

SO happy with our new bed.